MCC ROCKER FRONT BAR-PATHFINDER R51 (GROOVE BUMPER) (07/05-05/10) (078-01)

Not yet rated

Local Pickup - $0.00
This item cannot be delivered. You will need to organise pickup of your item from our shop.

MCC Rocker Front Bar Suits Nissan Pathfinder R51 (Groove Bumper) (07/2005-05/2010) (078-01)

078-01 Rocker Bullbar

ADR & winch compatible and rated for a 12,000lb low mount winch.
For type 078-01 no loop: loop does not exist.
For type 078-01 stainless steel single loop: bolt on system for centre loop made by 1.5mm 304 stainless steel 76.2mm diametre with standard two aerial mounting ports on bar.
For type 078-01 black steel single loop: bolt on system for centre loop made by 1.5mm steel with 76.2mm diametre with standard two aerial mounting ports on bar.
For type 078-02 triple loop: fully welded 3 pieces 1.5mm thick steel with 60mm diametre centre tube, 52mm shoulder tubes with standard two aerial mounts tab.
Bar constructed of one piece 3mm thick steel with durable sand black powder coat finished standard
Integrated winch mount on chassis.
4.5mm thick internal bar mounting flanges with 3.5mm wing bracing plates.
Fully welded 15mm thick towing shackle mounts standard, integrated directly into the internal structure for maximum strength. (Shackles may be purchased separately).
Designed to maximize approach and departure angles. With high clearance side wings and frontal pan.
Reinforce hi-lift jack lifting points for easy recovery operations.
Two pre drilled light mounting points on top of bullbar can fit up to 28 inch LED light bar or 7 inch LED round lights under the centre loop.
Standard recessed light ports with 110mm diametre halogen fog lights (hb4).
81mm diametre LED park & indicators lights